FEATURES
- Easy Operation with Minimal Instrumentation
- 2 MΩ Dl Sensor with Red/Green Indicator Lights
- Compact Aluminum Skid
- Sleek, Clean, Modular Design
- Operates Independently from RO System
- Internal Flow Orifices
- Includes 5-Micron Pre-filter
- Feed, Product and Concentrate Sample Ports
- No Concentrate Recirculation or Brine Injection
- Thin-Cell Efficient Technology
- Thin-Concentrate Non-Scaling Technology
- Unique Non-Scaling Electrode System
- Patented Excellion™ Membrane
BENEFITS
- No Operator Flow Settings; Flow Control is Internal
- Reliable, Uninterrupted 24/7 Operation
- Operating Cost (Electrical) is Pennies Per Day
- Greatly Reduces Disruptive Customer Site Visits
- Chemical-Free, Environmentally Friendly
- Flexible – Easy to Expand Modular EDI System Design
- Reliable – No Recirculation System Components to Fail
- Ideal Whenever Ion Exchange Tanks are not Economically or Logistically Feasible
- Ultrapure Water Quality Greater than 2 mΩ / cm (0.05 µS / cm)
- High Recovery of 90%+
- Ideal to Lease for Recurring Revenue and Rapid ROI
SPECIFICATIONS
| MODELS | EDI – 001 | EDI – 003 | EDI – 005 | EDI – 007 |
|---|---|---|---|---|
| Design | ||||
| Nominal Capacity (gpm / lpm) | 1 / 3.8 | 3 / 11.3 | 5 / 18.9 | 7 / 26.5 |
| Operating Pressure Nominal-Maximum (psi / bar) | 40-75 / 3-5 | 40-75 / 3-5 | 40-75 / 3-5 | 40-75 / 3-5 |
| Nominal Discharge Concentrate + Electrode (gpm / lpm) | 0.10 / 0.38 | 0.3 / 1.14 | 0.5 / 1.9 | 0.7 / 2.65 |
| Nominal Recovery (%) | 90 | 90 | 90 | 90 |
| Feed Water Specifications | ||||
| Feed ConductivityA | Optimum FCE < 9µS / cm Max FCE 33µS / cm | |||
| Total CO2 + HCO3 | < 5 mgn CO2 + HCO3 · (Optimum < 2 mg / l CO2 + HCO3 ) | |||
| Hardness | < 1.0 ppm @ 90% recovery (ask about higher hardness) | |||
| Organics | < 0.5 ppm TOC | |||
| Metals | < 10 ppb | |||
| Feed Temp | Optimum: 15° C-30° C Range: (5° C-35° C) | |||
| Feed pH | Optimum: 7.0-7.5 Range: 5.0 -9.5 | |||
| Feed Chlorine | ND | |||
| Silica, SiO2 | < 0.5 ppm | |||
| System Component Specifications | ||||
| Pressure Gauge | At Filter Outlet: Stainless Steel Case, Bronze Internals. Glycerin-filled | |||
| Pressure Regulator | Nickel Plated Bronze 3/4″. Set at 40 psi (2.7 bar) | |||
| Piping | 3/4″ PVC, Schedule 80 | |||
| Valves | Inlet Isolation Ball Valve, 2 Sample Valves | |||
| Flow Control | Product, Concentrate & Electrode Flow Control Orifices | |||
| Switches | Off/On Switch, Feed Low Pressure Cut-out, Concentrate Low Flow Cut-out | |||
| Filters | 5 Micron Prefilter, 4.5″ x 10″ | |||
| Concentrate | 1/2″ QC | |||
| Feed / Product | 3/4″ FNPT | |||
| Product Quality | 2 MΩ Dl Quality Indicator with Red/Green Indicator & Alarm Typical Product Quality: 5-18.2 MΩ (Depends on FCEA of RO Permeate) | |||
| System Electrical | ||||
| Power Usage –Nominal | 200W | 300W | 400W | 600W |
| Power Usage –Maximum | .8kW | 1.5kW | 1.6kW | 1.5kW |
| Electrical Input | 178-264 VAC, 50/60Hz, 1–Phase, FLA 20A | |||
| System Dimensions | ||||
| Approximate DimensionsB L x W x H (in /cm) | 25.75 x 25.75 x 60 / 65.41 x 65.41 x 152.40 | 25.75 x 25.75 x 60 / 65.41 x 65.41 x 152.40 | 25.75 x 25.75 x 60 / 65.41 x 65.41 x 152.40 | 25.75 x 25.75 x 60 / 65.41 x 65.41 x 152.40 |
| Approximate Weight (lbs / kg) | 125 / 56 | 137 / 62 | 145 / 66 | 161 / 73 |
Note: EDI Systems must have a reverse osmosis permeate feed at 30 -40 psi and a flow rate that is 10% greater than the rated product flow of the EDI.
A. FCE = Conductivity + 2.79 (CO2
) + 1.94 (SiO2). Example: Conductivity = 5.0µS / cm, CO2 = 3.5 mg / l, SiO2
= 0.5 mg / l, FCE = 5.0+2.79 (3.5)+1.94 (0.5) = 15.71µS / cm
Note: Conductivity (µS / cm) ~ 2.22 TDS (mg / l)
B. Does not include operating space requirements.
THE RIGHT SOLUTION FOR YOU
Contact us today for more information about our products and services.
CONTACT US