![](/wp-content/uploads/2024/05/s3-series-01.jpg)
Reverse Osmosis System
Product Images
![](/wp-content/uploads/2024/05/s3-series-01.jpg)
BENEFITS
- Fully Equipped and Customizable
- High Quality Components
- Individually Tested and Preserved
- Low Operation and Maintenance Costs
- Easy Maintenance and Servicing
- Pre-Plumbed, Wired and Assembled
- 1-Year Limited Warranty
FEATURES
-
S –150 Computer Controller
- LCD Backlit Display
- Pre-Treatment Lockout
- Tank Level Input
- Pressure Monitoring and Alarm
- TDS Monitoring
- Hour Meter
- Feed Flush
- High Rejection Seawater Membranes
- AXEON FRP– Series Membrane Housings
- AXEON 5-Micron Sediment Pre-Filter
- Permeate and Concentrate Flow Meters
- 0-100 psi 316L– SS Glycerin-Filled Filter In Pressure Gauge
- 0-100 psi 316L– SS Glycerin-Filled Pre–Filter Out Pressure Gauge
- 0-1500 psi 316L– SS Glycerin-Filled Concentrate Pressure Gauge
- Plast-O-Matic Feed Solenoid Valve
- AXEON 316L Stainless Steel Needle Valve
- 316L SS Feed Low Pressure Switch
- 316L SS High Pressure Pump Switch
- CAT® 316L High Pressure Pump
- TEFC Motor with Thermal Motor Protection
- Chemical Pump Outlet
- Powder Coated Aluminum Frame
- High Pressure 316L Stainless Steel Tubing and Fittings
- High Pressure Hose with Reusable SS Fittings
OPTIONS AND UPGRADES
- Booster Pump
- High Pressure Tank Switch
- Permeate Divert Valve
- Fresh Water Flush
- Ultraviolet Light
- Wooden Shipping Crate
![](/wp-content/uploads/2024/05/s3-series-03.jpg)
Notes:
- 1. All dimensions are given in inches.
![](/wp-content/uploads/2024/05/s3-series-04.jpg)
ARRAY SPECIFICATIONS
Model | Vessel Array | Vessel Size | Vessel Quantity | Membrane Size | Membrane Quantity |
S3 –1125 | 1 | 2540 | 1 | 2540 | 1 |
S3 – 2125 | 1:1 | 2540 | 2 | 2540 | 2 |
S3 – 3125 | 1:1:1 | 2540 | 3 | 2540 | 3 |
S3 – 4125 | 1:1:1:1 | 2540 | 4 | 2540 | 4 |
SPECIFICATIONS
MODELS | S3 –1125 | S3 – 2125 | S3 – 3125 | S3 – 4125 |
---|---|---|---|---|
Design | ||||
Configuration | Single Pass | Single Pass | Single Pass | Single Pass |
Feedwater SourceA | TDS < 35,000 ppm | TDS < 35,000 ppm | TDS < 35,000 ppm | TDS < 35,000 ppm |
Standard Recovery Rate % | 10 | 20 | 25 | 36 |
Rejection and Flow RatesB | ||||
Nominal Salt Rejection % | 99 | 99 | 99 | 99 |
Permeate Flow Rate (gpm / lpm) | 0.41 / 1.55 | 0.83 / 3.14 | 1.25 / 4.73 | 1.52 / 5.75 |
Minimum Concentrate Flow Rate (gpm / lpm) | 4.20 / 15.90 | 4.20 / 15.90 | 4.20 / 15.90 | 4.20 / 15.90 |
Connections | ||||
Feed FNPT (in) | 1/2 | 1/2 | 1/2 | 1/2 |
Permeate Tubing (in) | 3/8 | 3/8 | 3/8 | 3/8 |
Concentrate Tubing (in) | 3/8 | 3/8 | 3/8 | 3/8 |
Membranes | ||||
Membranes Per Vessel | 1 | 1 | 1 | 1 |
Membrane Quantity | 1 | 2 | 3 | 4 |
Membrane Size | 2540 | 2540 | 2540 | 2540 |
Vessels | ||||
Vessel Array | 1 | 1:1 | 1:1:1 | 1:1:1:1 |
Vessel Quantity | 1 | 2 | 3 | 4 |
Pumps | ||||
Pump Type | Plunger | Plunger | Plunger | Plunger |
Motor HP / KW | 2.50 / 1.85 | 2.50 / 1.85 | 2.50 / 1.85 | 2.50 / 1.85 |
RPM @ 60Hz (50 Hz) | 1725 / 1450 | 1725 / 1450 | 1725 / 1450 | 1725 / 1450 |
System Electrical | ||||
Standard Voltage + Amp Draw | 220VAC, 1PH, 11.9AC | 220VAC, 1PH, 11.9AC | 220VAC, 1PH, 11.9AC | 220VAC, 1PH, 11.9AC |
System Dimensions | ||||
Approximate Dimensions D L x W x H (in /cm) | 45.625 x 18 x 26.75 / 115.9 x 45.7 x 67.9 | 45.625 x 18 x 26.75 / 115.9 x 45.7 x 67.9 | 45.625 x 18 x 26.75 / 115.9 x 45.7 x 67.9 | 45.625 x 18 x 26.75 / 115.9 x 45.7 x 67.9 |
Approximate Weight (lbs/Kg) | 145 / 65.77 | 155 / 70.31 | 165 / 74.84 | 175 / 79.38 |
Test Parameters: 35,000 TDS Filtered (5–Micron), Dechlorinated, Municipal Feedwater, 45 psi / 3.1 bar Feed Pressure, 850 psi / 58.61 bar Operating Pressure, 77°F / 25°C, Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.
A. Low temperatures and feedwater quality, such as high TDS levels will
significantly affect the systems production capabilities and performance.
Computer projections must be run for individual applications which do not
meet or exceed minimum and maximum operating limits for such conditions.
B. Product flow and maximum recovery rates are based on feedwater
conditions as stated above. Do not exceed recommended permeate flow.
C. Varies with motor manufacturer
D. Does not include operating space requirements.
OPERATING LIMITS E
Maximum Feed Temperature (°F / °C) | 85 / 29 | Maximum Turbidity (NTU) | < 1 |
Maximum Feed Temperature (°F / °C) | 41 / 5 | Maximum Free Chlorine (ppm) | 0 |
Maximum Ambient Temperature (°F / °C) | 120 / 49 | Maximum Hardness (gpg) | 0 |
Minimum Ambient Temperature (°F / °C) | 40 / 4 | Minimum pH (continuous) | 11 |
Maximum Feed Pressure (psi / bar) | 60 / 4 | Minimum pH (continuous) | 2 |
Minimum Feed Pressure (psi / bar) | 15 / 1 | Minimum pH (cleaning 30 minutes) | 13 |
Maximum Operating Pressure (psi / bar) | 1000 / 69 | Minimum pH (cleaning 30 minutes) | 1 |
Maximum Feed Silt Density Index (SDI) | < 3 |
E. System pressure is variable due to water conditions. Permeate flow will increase at a higher temperature and will decrease at a lower temperature.
THE RIGHT SOLUTION FOR YOU
Contact us today for more information about our products and services.
CONTACT US