FEATURES
- White Powder Coated Steel Bracket
- AXEON 2.5″ x 20″ 5-Micron Sediment Pre-Filter
- AXEON 2.5″ x 20″ 10-Micron Carbon Block Pre-Filter (on LC – 750)
- Pentair® 20″ Slim Line Cartridge Housings
- Fluid-O-TechTM Low Lead Brass Rotary Vane High Pressure Pump
- ODP High Efficiency Carbonator Motor
- AXEON HF5 – Series Ultra Low Energy Membrane Elements
- Permeate Flow Meter
- Concentrate Flow Meter with SS Integrated Needle Valve
- Concentrate Recycle Flow Meter with SS Integrated Needle Valve
- Feed Solenoid Valve
- 0-300 psi Pump Pressure Gauge
- 0-100 psi Post-Filter Pressure Gauge
OPTIONS AND UPGRADES
- Fluid-O-TechTM Stainless Steel Rotary Vane Pump
- Blending Valve
SPECIFICATIONS
| MODELS | LC – 750 | LC – 1500 |
|---|---|---|
| Design | ||
| Configuration | Single Pass | Single Pass |
| Feedwater Source (ppm)A | TDS < 1,000 | TDS < 1,000 |
| Standard Recovery Rate % | Up to 75 | Up to 75 |
| Flow RatesB | ||
| Permeate Flow (gpm / lpm) | 0.52 / 1.97 | 1.04 / 3.94 |
| Minimum Feed Flow (gpm / lpm) | 2.22 / 8.40 | 2.74 / 10.37 |
| Maximum Feed Flow (gpm / lpm) | Up to 8 / 30.3 | Up to 8 / 30.3 |
| Connections | ||
| Feed (in) | 1/2 QC | 1/2 QC |
| Permeate / Holding Tank (in) | 3/8 QC | 3/8 QC |
| Concentrate (in) | 3/8 QC | 3/8 QC |
| Membranes | ||
| Membrane Per Vessel | 1 | 1 |
| Membrane Quantity | 1 | 2 |
| Membrane Size | 3018 | 3018 |
| Nominal TDS Rejection % | 98 | 98 |
| Vessels | ||
| Vessel Array | 1 | 1:1 |
| Vessel Quantity | 1 | 2 |
| Pumps | ||
| Pump Type | Rotary Vane 401 Low Lead Brass | Rotary Vane 601 Low Lead Brass |
| Motor HP | 1/3 | 1/2 |
| RPM @ 60Hz | 1725 | 1725 |
| System Electrical | ||
| Standard Voltage + Amp DrawC | 110V, 1 PH, 50 / 60Hz, 6.6A | 110V, 1 PH, 50 / 60Hz, 8.2A |
| System Dimensions | ||
| Approximate Dimensions C L x W x H (in /cm) | 17 x 13 x 34 / 43.18 x 33.02 x 86.36 | 17 x 13 x 34 / 43.18 x 33.02 x 86.36 |
| Approximate Weight (lbs / kg) | 50 / 22.68 | 60 / 27.22 |
Test Parameters: : 550 TDS Filtered (5-Micron), Dechlorinated, Municipal Feedwater, 65 psi / 4.50 bar Feed Pressure, 70 psi / 4.83 bar Operating Pressure, 77°F / 25°C, Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.
A. Low temperatures and feedwater quality, such as high TDS levels will significantly affect the systems production capabilities and performance. Computer projections must be run for individual applications which do not meet or exceed minimum and maximum operating limits for such conditions.
B. Product flow and maximum recovery rates are based on feedwater conditions as stated above. Do not exceed recommended permeate flow.
C. Varies with motor manufacturer.
D. Does not include operating space requirements.
OPERATING LIMITS
| Maximum Feed Temperature (°F / °C) | 85 / 29 | Maximum Turbidity (NTU) | 1 |
| Minimum Feed Temperature (°F / °C) | 40 / 4 | Maximum Free Chlorine (ppm) | 0 |
| Maximum Ambient Temperature (°F / °C) | 120 / 49 | Maximum TDS (ppm) | Up to 1,000 |
| Minimum Ambient Temperature (°F / °C) | 40 / 4 | Maximum Hardness (gpg) | 1 |
| Maximum Feed Pressure (psi / bar) | 70 / 4 | Maximum pH (continuous) | 11 |
| Minimum Feed Pressure (psi / bar) | 40 / 3 | Minimum pH (continuous) | 2 |
| Maximum Operating Pressure (psi / bar) | 90 / 6 | Maximum pH (cleaning 30 minutes) | 13 |
| Maximum Feed Silt Density Index (SDI) | < 3 | Minimum pH (cleaning 30 minutes) | 1 |
E. System pressure is variable due to water conditions. Permeate flow will increase at a higher temperature and will decrease at a lower temperature.
THE RIGHT SOLUTION FOR YOU
Contact us today for more information about our products and services.
CONTACT US