Wall Mount Reverse Osmosis System
Video
Product Images
FEATURES
- AXEON HF4 – Series Extra Low Energy Membrane Elements
- AXEON FRP– Series 300E Fiberglass Membrane Housing
- AXEON 5-Micron Sediment Pre-Filter
- AXEON 10-Micron Carbon Block Pre-Filter and Post-Filter
- Pentair® 10" Slim Line Cartridge Housings
- AXEON 0-300 psi Glycerin-Filled Pump Pressure Gauge
- AXEON 0-100 psi Glycerin-Filled Pre-Filter Pressure Gauge
- AXEON 0-100 psi Glycerin-Filled Permeate Pressure Gauge
- Aquatec® Tank High Pressure Switch
- Composite Feed Solenoid Valve
- Aquatec Auto Flush Timer Valve
- Aquatec High Flow Booster Pump
- John Guest® Push/Pull Fittings with Locking Safety Clips
OPTIONS AND UPGRADES
- 10" and 20" Floor Stands
- AXEON HF5 – Series Ultra Low Energy Membrane Elements
- AXEON SS – Series Membrane Housing
- HM-Digital® DM-2 Dual TDS Monitor
SPECIFICATIONS
| MODELS | L1– 200 | L1– 300 |
|---|---|---|
| Design | ||
| Configuration | Single Pass | Single Pass |
| Feedwater Source A | TDS < 1,000 ppm | TDS < 1,000 ppm |
| Standard Recovery Rate % | 40 | 50 |
| Rejection and Flow RatesB | ||
| Nominal Salt Rejection % | 98.5 | 98.5 |
| Permeate Flow (gpm / lpm) | 0.14 / 0.53 | 0.21 / 0.79 |
| Minimum Concentrate Flow (gpm / lpm) | 0.21 / 0.79 | 0.21 / 0.79 |
| Connections | ||
| Feed FNPT (in) | 3/8 QC | 3/8 QC |
| Permeate FNPT (in) | 3/8 QC | 3/8 QC |
| Concentrate FNPT (in) | 1/4 QC | 1/4 QC |
| Membranes | ||
| Membrane Per Vessel | 1 | 1 |
| Membrane Quantity | 1 | 1 |
| Membrane Size | 2514 | 2521 |
| Vessels | ||
| Vessel Array | 1 | 1 |
| Vessel Quantity | 1 | 1 |
| Standard Pumps | ||
| Pump Type | Aquatec 8800 | Aquatec 5800 |
| System Electrical | ||
| Standard Voltage + Amp Draw | 110V, 60Hz, 1PH, 4.0A | 110V, 60Hz, 1PH, 4.0A |
| High Voltage Service + Amp Draw | 220V, 50Hz, 1PH, 2A | 220V, 50Hz, 1PH, 2A |
| System Dimensions | ||
| Approximate Dimensions C L x W x H (in /cm) | 9 x 18 x 19 / 22.9 x 45.7 x 48.3 | 9 x 27 x 19 / 22.9 x 68.6 x 48.3 |
| Approximate Weight (lbs / kg) | 42 / 19.1 | 50 / 22.7 |
Test Parameters: 550 TDS Filtered (5-Micron), Dechlorinated, Municipal Feedwater, 65 psi / 4.50 bar Feed Pressure, 100 psi / 6.9 bar Operating Pressure, 77°F / 25°C, Recovery as stated, 7.0 pH. Data taken after 60 minutes of operation.
A. Low temperatures and feedwater quality, such as high TDS levels will significantly affect the systems production capabilities and performance. Computer projections must be run for individual applications which do not meet or exceed minimum and maximum operating limits for such conditions.
B. Product flow and maximum recovery rates are based on feedwater conditions as stated above. Do not exceed recommended permeate flow.
C. Does not include operating space requirements.
OPERATING LIMITS
| Design Temperature (°F / °C) | 77 / 25 | Maximum Turbidity (NTU) | 1 |
| Maximum Feed Temperature (°F / °C) | 85 / 29 | Maximum Turbidity (NTU) | 0 |
| Maximum Feed Temperature (°F / °C) | 40 / 4 | Maximum TDS (ppm) | 1,000 |
| Maximum Ambient Temperature (°F / °C) | 120 / 49 | Maximum Hardness (gpg) | 1 |
| Minimum Ambient Temperature (°F / °C) | 40 / 4 | Maximum pH (continuous) | 11 |
| Maximum Feed Pressure (psi / bar) | 85 / 6 | Minimum pH (continuous) | 2 |
| Minimum Feed Pressure (psi / bar) | 45 / 3 | Maximum pH (continuous) | 13 |
| Maximum Operating Pressure (psi / bar) | 110 / 7.5 | Minimum pH (cleaning 30 minutes) | 1 |
| Maximum Feed Silt Density Index (SDI) | < 3 |
D. System pressure is variable due to water conditions. Permeate flow will increase at a higher temperature and will decrease at a lower temperature.
THE RIGHT SOLUTION FOR YOU
Contact us today for more information about our products and services.
CONTACT US